Improving Your Stitch: 7 Kickass Cross Stitch Tips

Looking for cross stitch tips? Mr X Stitch has you covered
Improve Your Embroidery Techniques With A Stitchalicious In Time!

In homage to our favourite Kingpin, and because it’s one of the “easy beginner” techniques, I’m spending today’s column on cross stitch tips and how up your xstitch game.

I know it’s “simple” to make a picture in X’s, but that doesn’t mean there aren’t ways in which your cross stitch can be perfected. And to offer a little enticement to get to the end of this rather long post, I’ve included a small pattern at the bottom so you can test out those new skillz (added points to those who can guess which country I’m in right now).

Silk embroidery floss can be used just as you would use cotton embroidery floss: use two strands on 14-count Aida or over two threads on 28-count linens. This is Kreinik Silk Mori, a 6-ply 100% pure silk floss. It is easy to use and perfect for beginners who want to try stitching with silk. Full color line shown here http://www.kreinik.com/shops/Silk-Mori-2.5m-Skeins.html
Kreinik Silk Floss is a sumptuous stitching solution!

1. The Right Amount Of Floss

Okay, this is a very basic one – use the right amount of floss. Firstly, this means using the right number of strands to get coverage of the fabric – you don’t want to be able to see the fabric beneath the stitches and if you can you need to use one more strand in your needle.

Secondly, use the right length of floss – it should only be about the length of your forearm and hand. If you have too long a length it a) gets ratty before you’re finished with it by being constantly pulled through the fabric and b) takes ages to stitch as you have to extend your arm so far to pull the stitch tight. In a related note, finish your floss off before you get to the disgusting skinny, pulled out, licked end of it that you try and finagle for a few more stitches. Saving 3cm of thread just is not worth the hassle nor the shoddy appearance.

2. Tension

Tension in your stitching is by far the easiest thing to correct, especially if you’re using a hoop – pull tight but not so tight that you stretch the hole at all. If you stitch in hand (as I tend to – naughty me!) you have to be more careful.

I find that pulling the thread mostly through and then using my little finger in the hand holding the needle to “flick” the tail the final bit gives perfect tension and is reproducible for each stitch. Pay attention to the tension you’re applying as, if you stitch in different directions or do “patches” of stitching over the piece, you’ll pull it in weird directions.

Washing and blocking the finished piece will help even it out if you’ve been a bit lax though!

3. Railroading

Railroading means you try and get both floss threads to lie parallel. This is one of those cross stitch tips that will elevate your work to a more competition standard! The easiest way to railroad is to use another large needle to hold underneath them as you’re pulling the stitch tight.

If you like specialist gear you can get a laying tool  – effectively a large needle.

4. Fractional Stitches

Now, I’ve nothing against complete crosses, but sometimes it’s nice to be able to get a bit more detailed in a cross stitch you’re designing. Or you may have come across fractional stitches in a purchased pattern and aren’t sure what to do. Dare to use these stitches in both your designing and your stitching and you’ll see what a difference it can make.

The deal with fractional stitches (also called half stitches) is that, almost always, it is actually a ¾ stitch and a ¼ stitch (see picture below). How it should be split (which colour gets ¾, which ¼) is usually left up to you.

In most cases, I go by gut judgement on which colour “deserves” the ¾ more. Is it a small detail fragment against a background colour? Give the 3/4 to the detail. The one place when you can potentially make it really half stitches and balance them out is when there’s a backstitch running across the middle, however that usually isn’t great for keeping overall thread coverage even.

Cross Stitch Samples
A. Full cross stitch; 1/4 stitch in one direction; 1/4 stitch in another direction; 3/4 stitch where the “half is the top stitch; 3/4 stitch where the “half” is the bottom stitch. B. Showing a complete cross with the two fractional stitches in different halves. C. Two 1/4 stitches, where a backstitch could be used to divide them.

5. Back Stitch

Backstitch is one of those weird little stitches for me. Save working it for last, as you can seriously pull it out of whack if you try doing it as you’re going. Often when I finish all the cross stitches, I wind up liking it so much that I’m not sure the backstitching will add anything to it – usually I’m wrong.

Backstitch is a two-step forwards, one-step back stitch – you travel forward underneath the fabric and make the stitch on top of the fabric go backward. Then you travel forwards to the front of the next stitch underneath. You’re probably tempted, as I am, to mix back stitch with running stitch just to save time and threads (doing every second stitch forwards).

WITHSTAND THE TEMPTATION (sorry for the all caps – I’m on a diet). Doing so gives your lines a dash-like appearance. Backstitch all the way – it can be tedious, but it really does look better.

6. Give Linen A Shot

No collection of cross stitch tips would be complete without a look at the materials you stitch on! Fabric choice for cross stitch usually comes down to Aida or linen but do not be fooled. The world is your oyster thanks to a wonderful little thing called Waste Canvas. But first, lets get Aida and linen out of the way.

See Also
Casstasstrophe's Big Bang Theory needlepointed Tissue Box Cover

Aida is the beginners fabric of choice, having nifty little holes making perfect little squares. You can start with a large count (e.g. 12 stitches per inch) but I’d use three strands of floss for good coverage. Go down to a 14 or 16 to make your work finer (and smaller). Use two strands for those.

Linen comes in two general types: evenweave and, well, linen.

Evenweave is – surprise,  surprise – even, while in linen the threads making up the fabric vary in size and sometimes have big lumps (slubs). Evenweave is easier for linen n00bs and gives very even stitches, while linen throws in a bit of variety to the stitch size.

To stitch on linen, you normally stitch “over two” meaning making the cross over two threads in the fabric. An easy way to do this quickly is to learn to look for the leading strand. This is where one of the vertical threads goes over the horizontal one. If you always stitch with that on the upper right of the hole you’re using, you’ll find your eye naturally slips to the right spot without having to count the two threads. Also, stitching there stops your floss from slipping under the weft. The marvellous Connie G. Barwick describes it in her guide to stitching on linen.

Looking for cross stitch tips? Mr X Stitch has you covered

7. Use Waste Canvas

Waste Canvas is a nifty little invention is a canvas the pulls apart when you’re finished with it, so you can lay it over whatever fabric you’d like and do perfect cross stitch with it. When you’re done soak it in water and the canvas threads separate and you can pull them out.

  • Hint: use tweezers to pull them out as it can be really tough on your fingers.
  • Double Hint: cross stitching on denim using waste canvas looks great, is hell on your fingers.
  • Triple Hint: check out soluble canvas which achieves the same goal but you dissolve the fabric away in warm water!

Finally…

And now, as promised, your practice design: Kia Ora. Use whatever colours you like, but I’d suggest black or a dark brown for the square symbol and backstitching with a medium green, brown or blue for the circle symbol stitches. Or, hell, try hot pink. Do what works for you, but don’t forget to try and use the cross stitch tips we’ve talked about here and see how you get on!  Happy stitching!

Stitchalicious' free Kiaora cross stitch pattern

Want Some More Embroidery Tips?

If you like cross stitch and want more ideas and inspiration, then The Mr X Stitch Guide to Cross Stitch is the book for you! With modern designs, tips, techniques, artist interviews and more, it’s the Kingpin of Contemporary Embroidery’s love letter to the stitch that got him started. Get your signed copy from the XStitch Magazine shop!

The Mr X Stitch Guide to Cross Stitch
The Mr X Stitch Guide to Cross Stitch
View Comments (8)
  • You made an error in you Aida section: 12 count is the LARGER size (12 stitches per inch) while 14 and 16 are smaller (14 and 16 stitches per inch respectively).
    Otherwise thanks for the tips. 🙂

  • An easier way to “railroad” that I’ve found is every time you make a stitch, instead of just going through the hole and letting your floss twist, “split” your floss – use your needle to separate your 2 strands and then, with your needle between the strands, go through the hole. This eliminates the 2 strands twisting around each other and doesn’t create any extra steps. Perfect stitches every time. Thank Jane Greenoff’s Cross Stitcher’s Bible for that handy tip!

  • @Kuja.Girl and that is why I should never proof read late at night at a campsite with dodgy internet. All fixed now, and thanks for picking it up!

    @Kate I haven’t used that method in years, thanks for reminding me of it! Can’t believe I stopped using it actually – it certainly is easier if you aren’t used to wielding a laying tool or stitch in hand.

    @Ansie 🙂 also give Kate’s method a try, and let us know how it goes

  • @Stitchalicious – haha np 🙂 I realized what you wrote was technically correct but confusing, it’s the way aida cloth is labeled – the smaller “count” the larger the stitches (and visa versa)

  • Indeed I am!! And I have to say – New Zealand is, hands down, the most stunningly gorgeous place I have ever seen in my life. I leave in two days *sob* but will be back. Oh yes, I will be back!

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Scroll To Top